Release notes for Warrior Casedhole 071220
|
All Logging |
Fixed bug that kept some logs from starting |
Release notes for Warrior Casedhole 071207
|
All logging |
SGR frame time corrections and storage of cals in tools.ini |
|
All logging |
Robertson SCNT slim-hole neutron model added. |
|
All Logging |
SDS CY driver updates to disconnect/reconnect gracefully |
|
All Logging |
LASW - Added default step size option to main dialog. If you enter 0.5 for the default, then the next time the program starts, the Current sample rate will be set to 0.5 |
|
All Logging |
LASW - Handle longer time logs |
|
CH Logging |
Multiarm.exe works better with new BHImg.dll. Added bhimg presentation option to main dialog. Must select a bhimg presentation for 3D Viewer to start. |
|
All Logging |
After total restore, run reinstall of drivers after reboot. |
Release notes for Warrior Casedhole 070814
|
Depth |
In depth control, separate button added to connect to Depth Panel. Apply button will only apply depth. |
|
CH Logging |
Hotwell PNN detection enhancements with auto thresholds |
|
CH Logging |
HDB3 (XIPE Caliper) and DAQING (Probe Caliper) telemetry enhancements |
|
All logging |
Fixed IMG PERR, MINR and MAXR curves |
|
CH Logging |
Sector based BIx and Attenuation curves, as well as an Image map. |
|
All logging |
External Power Supply Support |
|
All logging |
New CCL board support |
|
All logging |
CPFD and CPFH added |
Release notes for Warrior Casedhole 070628
|
All logging |
User defined depth units reflected in naming of exported noise station wave files |
|
CH Logging |
Additional tool support for Spartek ILS and NFL |
|
OH Logging |
SP procesing optional through this tool module. |
|
All logging |
CanadaTech Pres. Support. |
|
All logging |
Added optional realt time output to usr tool module sensors |
|
TVD Calculations |
Add Minimum Curvature calculations. Requires warrior.ini setting in [TVD] section: "Formula=MinCurvature" |
Release notes for Warrior Casedhole 070511
|
All Logging |
Support for Open Hole Shooting panel type |
|
All logging |
Add UTCTIM, LOCTIM outputs. Add to service same as TOD -> "LOCTIM=AUX,ELTIM". LOCTIM is local time in seconds since 1/1/1970. UTCTIM is seconds referenced to GMT. |
|
Printing |
Can print long jpegs. |
|
Plotting |
Add option to create black grid lines for a particular printer - overrides whatever grid lines were set to in log format. Some windows printers look better with black vs gray grid lines. |
|
Plotting |
Multi line log inserts. Signature spectrums can have colors. More control over grid lines. |
|
Plotting |
Multi line log inserts. Signature spectrums can have colors. |
|
Plotting |
Users have more control over how grid lines are created. |
|
TVD plotting |
New 3D closure plot. |
|
Control Panel |
Show version info in Control Panel. |
Release notes for Warrior Casedhole 070322
|
All Logging |
Daqing Caliper support, filter support for meas sensor |
|
PIP Logging |
Support FX1 based Pip panels |
|
All Logging |
Support Probe Shooting Panels with no AC shooting power capability |
|
All Logging |
Probe 2.75" CNT tool dolomite response updated |
|
All Logging |
Added option to show/hide offsets of non-serial items |
|
All Logging |
Fixed Wargauge alarm settings not all translated to/from metric properly |
|
LAS Export |
Added option to output variables as LAS curves |
|
All Logging |
Lis2War uses standard Geodetic Units functions. |
|
All Logging |
Fixed Usr Tool calibration date bug. |
Release notes for Warrior Casedhole 061031
|
Plotting |
Added filter report. Fix plot jobs with multiple bitmaps. More accurate plotter calibrations. |
|
All Logging |
Optional Verifications for usr.dll tool software |
|
All Logging |
XIPE multi-arm caliper support |
|
PL Logging |
Made outputs available for time to depth logs |
|
SDSTIP |
Support solid-state aux power switching ("RelayPowerGate") |
|
Noise Logging |
Manual gain (range setting) option for noise service |
|
TVD Calculations |
Can read in curves from log pass for input to tvd calculations |
|
PIP |
PIP panel PPAB Speaker output support |
Release notes for Warrior Casedhole 060825
|
Log formats |
Add Image 3D and Potato plot types for multi arm caliper array data. |
|
Plotting |
Can start XYPlot when service starts like Iplot. Extra parameters entered in Services Editor. |
|
All logging |
Generic Borehole Imaging tool module |
|
All |
Bugfix recalculation of depth-shifted data |
|
CH Logging |
Titan telemetry 24 bit raw data channel support |
|
All Logging |
Temp. Compensated XY Caliper tool; ported to Win-32. |
|
Printing |
Add calibration for Windows printers |
|
CH Logging |
Added spinner calculation program - Flowvelocity |
|
All logging |
Compatibility fix for FX1 based hardware with VIA USB host controller |
|
All logging |
Average Caliper output added to XYCal; slight clean-up. |
|
Perforating |
Use service dump for more accurate sensor offset calculations. Bug fix - Closing all from Acquisition while wizard was open could delete joplan entries. |
|
Tool string drawing |
Use service dump for more accurate sensor offset calculations. |
|
Alarms |
Alarms now can be canceled in groups - depth, depthpnl using new alarms. |
|
All logging |
Multiple gain/filter board support, new I2C system addressing enhancements |
|
All logging |
Multiple DSP board support |
|
All logging |
New I2C system addressing enhancements, support for USB44R6 |
|
All logging |
New I2C system addressing enhancements |
|
TVD Calculations |
Uses new tvd library - DS points will be saved in a database instead of external file. TVD plots won't need to be saved to database, can be added to plot job later. |
|
All logging |
CNTP-313-B Probe Tool Added - New Algorithm. |
|
Headings |
Headings can have watermarks |
|
CH Logging |
Panex Spinner Flow support |
|
Tool string drawing |
User can create their own list of sensors to hide in the tool string drawing. File logsys.ini, section [ToolDiagramSkipSensors], then list sensor names 1=SENS1, 2=SENS2, etc. |
|
Plotting |
Can enter a decimal value for line thickness to fine tune curve thickness on printers with resolution >= 300 |
|
Well Objects |
Casing, plugs, packers can have colors. |
|
All logging |
New device for surface acquisition |
|
All Logging |
Bug fix for data transfer |
|
Tool Power Monitor |
Bugfix tool power monitor config, inhibit. Can now declare “NoMonitor=yes” in specific services (or globally via Warrior.ini) |
Release notes for Warrior Casedhole 060407
|
CH Logging |
Hotwell PNN downlink timing improvement and biased output returns to max. pos. rail for larger neg. deflections |
|
All logging |
Nominal gains and offsets for Tvolt and Tcurr by panel type |
|
CH Logging |
Sondex PL telemetry has new channel type "flowdir2" for modified XMW using two channels for flow rate and direction |
|
CH Logging |
Fix for PIP panel PLL multipliers |
Release notes for Warrior Casedhole 060321
|
All logging |
Bug fix - Could cause "Unable to create curve" errors at log up time. |
|
Windows printing |
Can adjust resolution of Windows Printing source data via Warrior Control Panel. Lower resolution speeds up printing but can lower print quality. This setting is used in addition to the printer resolution set in the Windows printer settings. |
|
XY Plot |
Legend for curve names, Editable legend items, Uses banner for heading, Can plot constant values for reference. |
|
Plotting |
Add entry to warrior.ini in [Heading] section for "defaultbanner". If entry not there then will use title.wlb |
|
Sondex Support |
Sondex PL supports flow detection on all lines including H2S. QPS bug fix |
|
Plotting |
Can show legend for shading in log inserts |
|
All Logging |
Prohibit Panel Type change (flag setting to enable in Warrior.ini) |
|
All Logging |
Logging releases use new style device drivers |
|
All Logging |
Sondex name fix, gauge overflow fix, smoother output filename handling |
|
All Logging |
Fix resource leak - was causing misc. device record and storage errors when recording multiple passes of logs with many outputs |
|
Perforating |
New Perf Job Planner |
|
Panex Support |
Panex GR support, other updates per Panex |
|
Cal reports |
Cal reports now have a heading with database and dataset source for cals. |
|
Printrex printing |
For 820RM printers, add 820RM=1 to printrex printer section in warrior.ini. |
|
Heading |
Added 'U' for underline edit type in .hdg file. "editHSLTU", "editVSLTU", etc. |
|
Services Editor |
Tools will be exported with service into wcf file by same name as wsv file. Tools can be imported with service by same method. When editing tools for service, can see list of current tool/serial numbers to pick from. |
|
Panex Support |
Bug fix to coefficients file read in |
|
Panex Support |
Enhanced Panex monitor and control |
|
Creating Alias |
Dialog will not close after alias created, but user will see status message if alias created successfully. |
|
Backup |
Was not checking set aside space for backups properly. |
|
LIS export |
Added option "OneFramePerRecord" to [LIS Export] section. Required for WellCad software to read sonic data. |
|
Cal reports |
Can draw rectangles around entries by prepending underscore before text. [Columns] entry can have start,stop values ( 1=0,20 ), and stop value for columns is required for rectangles to come out correct. |
|
SCBL |
Can manually adjust gates after automatic moves |
|
Waveform Display |
When multiple waveforms are in window, double click to fill window with that waveform and double click again to go back to multiple display. |
|
Plotting to Fax |
Move plot options to config dialog like other printers. Add option for Normal ( 100dpi ) and Fine ( 200dpi ). Default is Fine - which is what it was hard coded to before. Requires new entry in warrior.ini for [Fax] - "custom=faxfile32.dll". |
|
Well Objects |
Well object Highlight type can have different colors. Perfs with single depth will show up now. |
|
Plotting |
Added 'repeat' mode for correlation curves. Correlation curves will only be plotted if that curve is shown. So you can show curves from main pass on top of repeat pass to easily see repeatability |
|
All Logging |
Default software power controls to be off, override via new control word in service or global enable via warrior.ini |
|
All Logging |
New safety feature: Tool Power will be disabled if line current drops out |
|
Merge |
Warn user if depth correction is entered and no curves have depth correction to be applied |
|
Tracer Interp |
Can use caliper reading as casing ID value for calculations |
|
CH |
Support for Geofizika PL string |
|
Tool string drawing |
Was not always showing proper offsets for tracer tools |
|
All Logging |
Open line monitor temporarily inhibited during tool power voltage/current calibration |
|
Perforating |
Update CYShpl support to monitor AC/DC and Pos/Neg switch positions when available |
|
All logging |
Modifactions to Sondex/CSS Compensated Neutron calibration and verification routines |
|
Config restore |
Run latest warrior convert option when restoring config files |
|
Tool string drawing |
Fix for multiple instances of the same tool |
|
Direct printing |
First plot from Job Editor will be spooled so printer won't start/stop |
|
LAS Export |
Fix CNTY=COUNTY |
|
XY Plot |
Can turn off curve labels. Added more curve styles. Print directly to Windows printer for better quality. |
|
Hot var editor |
Was not working properly on numeric values. |
|
Waveform plotting |
Fix for low vdl levels - before were coming out all white. |
|
Interactive plot |
Bug fix hangup of Iplot if you have it minimized and save a well object to the same database. |
|
All logging |
Big fix for probe telemetry channel offset and Titan "combined" channel types |
|
Services,Tools editor |
Saving a service will also create a file with tools for that service, then Import will look for both files |
|
Format editor |
Speed up reading/writing of log formats |
|
All logging |
CYAuxF1 - new device support |
|
DSP logging |
Ability to specify pmon for "Probe" command |
|
All logging |
Tool Power monitor settings can be specified per service |
|
All logging |
Robertson Geologging 6 Channel and 12 Channel Telemetry support |
|
All logging |
CYShPnlF1 - new device support |
|
CH Logging |
Includes Hotwell PNN |
Release notes for Warrior Casedhole 051110
|
LAS Export |
User can add their own heading information via [Heading] section in las.ini |
|
All logging |
Bug fix - Could cause "Unable to create curve" errors at log up time. |
|
Windows printing |
Can adjust resolution of Windows Printing source data via Warrior Control Panel. Lower resolution speeds up printing but can lower print quality. This setting is used in addition to the printer resolution set in the Windows printer settings. |
|
All logging |
Legend for curve names, Editable legend items, Uses banner for heading, Can plot constant values for reference. |
|
Plotting |
Add entry to warrior.ini in [Heading] section for "defaultbanner". If entry not there then will use title.wlb |
|
Sondex Support |
Sondex PL supports flow detection on all lines including H2S. QPS bug fix |
|
Plotting |
Can show legend for shading in log inserts |
|
All Logging |
Prohibit Panel Type change (flag setting to enable in Warrior.ini) |
|
All Logging |
Logging releases use new style device drivers |
|
All Logging |
Sondex name fix, gauge overflow fix, smoother output filename handling |
|
All Logging |
Fix resource leak - was causing misc. device record and storage errors when recording multiple passes of logs with many outputs |
|
Perforating |
New Perf Job Planner |
|
CTS Telemetry |
CTS Telemetry monitor showing Caliper commands |
|
Sondex Support |
Sondex MIT supported |
|
Panex Support |
Panex GR support, other updates per Panex |
|
Cal reports |
Cal reports now have a heading with database and dataset source for cals. |
|
Printrex printing |
For 820RM printers, add 820RM=1 to printrex printer section in warrior.ini. |
|
Heading |
Added 'U' for underline edit type in .hdg file. "editHSLTU", "editVSLTU", etc. |
|
Services Editor |
Tools will be exported with service into wcf file by same name as wsv file. Tools can be imported with service by same method. When editing tools for service, can see list of current tool/serial numbers to pick from. |
|
Panex Support |
Bug fix to coefficients file read in |
|
Panex Support |
Enhanced Panex monitor and control |
|
Creating Alias |
Dialog will not close after alias created, but user will see status message if alias created successfully. |
|
Backup |
Was not checking set aside space for backups properly. |
|
LIS export |
Added option "OneFramePerRecord" to [LIS Export] section. Required for WellCad software to read sonic data. |
|
Cal reports |
Can draw rectangles around entries by prepending underscore before text. [Columns] entry can have start,stop values ( 1=0,20 ), and stop value for columns is required for rectangles to come out correct. |
|
Memory Logging |
Major enhancements for LGAT, Lonkar Gamma Analysis Tool |
|
SCBL |
Can manually adjust gates after automatic moves |
|
Waveform Display |
When multiple waveforms are in window, double click to fill window with that waveform and double click again to go back to multiple display. |
|
Plotting to Fax |
Move plot options to config dialog like other printers. Add option for Normal ( 100dpi ) and Fine ( 200dpi ). Default is Fine - which is what it was hard coded to before. Requires new entry in warrior.ini for [Fax] - "custom=faxfile32.dll". |
|
Well Objects |
Well object Highlight type can have different colors. Perfs with single depth will show up now. |
|
Plotting |
Added 'repeat' mode for correlation curves. Correlation curves will only be plotted if that curve is shown. So you can show curves from main pass on top of repeat pass to easily see repeatability |
|
All Logging |
Default software power controls to be off, override via new control word in service or global enable via warrior.ini |
|
All Logging |
New safety feature: Tool Power will be disabled if line current drops out |
|
Merge |
Warn user if depth correction is entered and no curves have depth correction to be applied |
|
Tracer Interp |
Can use caliper reading as casing ID value for calculations |
|
CH |
Support for Geofizika PL string |
|
Tool string drawing |
Was not always showing proper offsets for tracer tools |
|
All Logging |
Open line monitor temporarily inhibited during tool power voltage/current calibration |